UV Resin Water Washable 1Kg (Anycubic) – Black

(7 customer reviews)


๐Ÿšš 3-7 Days Delivery – All Europe

  • Curing wavelength: 365 – 405 nm
  • Bottom Layer exposure: 20-80 s
  • Regular Layer exposure: 5-15 s
  • Low Shrinkage.
  • Durable Prints.
  • Super Easy to Clean
  • High Precision and Low Shrinkage
  • Low Odor and Safe
Contact here for more info


3D Printing Black UV Resin Water Washable 1Kg (Anycubic)

Anycubic Water Washable Resin contains hydrophilic groups with good water solubility, which is can be directly cleaned with water instead of alcohol and greatly save the cost of alcohol use. Besides, it can also be cleaned by Anycubic Wash and Cure Machine or ultrasonic cleaning. Anycubic Black Water Washable UV resin prints the models with low shrinkage during the photo curing process, which ensures the high precision and smooth surface. The low shrinkage rate ensures that every model is printed in good details.

  • Low Shrinkage.
  • Durable Prints.
  • Super Easy to Clean
  • High Precision and Low Shrinkage
  • Low Odor and Safe


Do not mess up cleaning UV resins with gloves anymore, water washable UV resins provide easy prints for beginners and at the best quality. Check some technical specifications:

  • Curing wavelength: 365 – 405 nm
  • Bottom Layer exposure: 20-80 seconds (for Anycubic 3D printers)
  • Regular Layer exposure: 5-15 seconds (for Anycubic 3D printers)
  • Hardness: 80D
  • Flexural modulus: 1,5 – 1,6 Gpa
  • Flexural strength: 50 – 60 MPa
  • Tensile modulus: 1,6 – 1,8 Gpa
  • Tensile strength: 30 – 45 MPa
  • Impact strength: 50-60 J/m


About Anycubic UV Resins

Anycubic is one of the premium brands for 3D printing Resins. It provides a huge range of materials for printing that follow same high-quality standardsย such as:

  • Low bubbles creation.
  • Low contraction
  • High success printing rate
  • Vacuum packing, no leakage.

Anycubic brand

Anycubic Water Washable 3D Printer Resin, High Precision 405nm UV-Curing Resin, Low Shrinkage Standard Photopolymer Resin for LCD DLP 3D Printing

About this item:

Additional information





UV Resin Type

Water Washable

Curing wavelength

365 – 405 nm

Bottom Layer exposure

20 – 80 s

Regular Layer exposure

5 -15 s


1 Kg

7 reviews for UV Resin Water Washable 1Kg (Anycubic) – Black

  1. NikkiandAndy

    Good quality and consistent resin that prints nicely and doesn’t over shrink.Don’t over cure and don’t over wash to keep it bright white but anycubic basic printed lovely.

  2. Kieran Goodlet

    This resin is fantastic, it’s very low odour with it set up in a room adjoining to my office where I work during the day, I don’t notice any smell at all. I would advise still wearing gloves when handling this despite the manufacturers promotional images just to stay on the safe side. I’d also encourage you to be aware that an uncured/partially cured model can get a little bit of a funky smell to it (soya-based after all and you can really tell then) so make sure your models are well cured.

  3. 3dinvisible3dinvisible

    First of all this resin came in very good packaging with lot of protection to survive all that mad transportation.I got this black resin to print some of parts and I also printed this Batman wich printed very nicely without any problem.Resin is of very good quality and ล•qare giving very nice end results, printed parts are clean and it is easy to clean them from excess resin.Will definitely buy more of this resin.I can recommend buying this product.

  4. Peter Pringle

    I have used this resin for several prints now and it is as good (if not better) than the standard resins I have used so far.My Creality Halot 1 has had no problems so far, even with the same settings I use for all my other resins. I thought the ‘water washable’ part might be a gimmick, but it really does clean completely with only tap water.You can still wash the prints in alcohol/methylated sprit etc. but it is not needed.I also have an anycubic wash+cure station, and being able to fill it to the brim with only water is much easier/cheaper/less toxic. Not to mention being able to clean the printer itself this way tooOverall I would recommend Anycubic water washable

  5. Z

    Used this on a MSLA printer. It printed fine quite well with low exposure times. Compared to other resins the odour isn’t too strong. It also managed to print in my cold garage overnight – something other resins have struggled to do.The colour cures to a creamish colour. It was fine for me but if you want a more white you may need to paint your prints.

  6. KevinR

    Resin that performed better than expected, not as overpowering an odour as other brands, first few prints had excellent details for very low exposure times.

  7. margaret emmerson

    This resin works quite well. The color comes out the printer as a very shiney black color. It deepens and gets a little less shiny once cured. I used 6 second exposure time for 0.5mm layers the same as my normal settings and it cures great at that time. I didn’t notice it sticking to the FEP film more than other resins and it attached to the bed without any issue. First print went fine and the others have been fine as well.No issues with this resin, will purchase again.

Add a review

Your email address will not be published.